Number Plate Lights: UK Rules and MOT Checks
A blown number plate bulb is easy to miss. Here’s how the MOT treats it, and what to check before your test.
Yes, your rear number plate light is checked at the MOT, and a dead one can fail it. If your plate has only one lamp and it’s out, or all the lamps are out, the MOT manual lists that as a Major defect. Any major defect means your vehicle fails. If the plate has two or more lamps and only one is out, it’s a Minor defect. A vehicle with only minor defects passes, though the fault can be listed on your result. The lamps must also come on with your position lamps, and they must not throw direct white light out to the rear.
Is the number plate light checked in an MOT?
Yes. The MOT inspection manual tells testers to inspect the registration plate lamps on every vehicle fitted with front and rear position lamps. If your car or van has sidelights front and rear, this applies to you.
The rule is simple: the lamps must light up the rear registration plate. Some vehicles have them tucked behind the plate rather than above it, and they still count.
The manual also defines what a “light source” is: any bulb, LED or other way of producing light. So the tester judges whether the plate is lit, not what kind of bulb your car uses.
Minor or major: what the MOT manual says
The defect a tester records depends on how many lamps your plate has and what’s wrong with them. This is the table from section 4.7 of the manual, in plain English:
| What the tester finds | MOT manual category |
|---|---|
| A plate lamp throwing direct white light to the rear | Minor |
| One lamp or light source missing or not working, on a plate with two or more | Minor |
| The lamp missing or not working on a plate with only one, or all lamps not working | Major |
| A plate lamp not securely attached | Minor |
| A plate lamp likely to become detached | Major |
| Plate lamp doesn’t come on at the same time as the position lamps | Major |
The key line is the third one. Lots of cars have just one plate lamp. If that single bulb has blown, the manual puts it in the Major category, the same as a car with two lamps that are both out.
If your car has two lamps and one has failed, it’s listed as Minor. Even so, it’s worth fixing before the test. You don’t want the second bulb to go next.
Plate lamps must work with your position lamps
The manual says registration plate lamps “must operate at the same time as the position lamps”. When the tester switches on your position lamps (the small lamps front and rear), the plate light should come on with them.
If the plate lamp doesn’t come on at the same time, the manual lists it as a Major defect. That can happen if the bulb only works with another light switch, or if there’s a wiring fault.
The same page of the manual also says the front and rear position lamps must light up together with the registration plate lamps, and that rear position lamps must give a steady red light.
What “direct white light to the rear” means
The plate lamp is there to light the plate, so its light should land on the plate. The manual lists a lamp “throwing direct white light to the rear” as a Minor defect.
The manual doesn’t explain this further, but in plain terms it points to a lamp shining straight out backwards rather than down onto the plate. A damaged lens, a lamp fitted at the wrong angle or an unsuitable unit could cause it.
If you’re replacing a lamp or bulb, use the right part for your vehicle and make sure it sits in its housing the way it should. If you’re not sure, check your vehicle handbook or ask a garage.
Motorcycles, mopeds and small vehicles
Motorcycles have their own MOT manual, and it’s just as clear: the rear registration plate must be lit.
The motorcycle manual explains that most bikes light the plate with the rear position lamp, but some use a separate registration plate lamp. Either way, the plate has to be lit.
Motorcycles registered on or after 1 September 2001 show a number plate at the rear only, so the rear plate is the one that matters.
The car manual also notes that tricycles and quadricycles classed as mopeds don’t need a rear registration plate lamp.
The light is only half the job: check the plate too
A working lamp won’t help if the plate itself isn’t up to standard. Under GOV.UK rules, number plates must:
- be made from a reflective material
- show black characters on a white background at the front and a yellow background at the rear
- have no background pattern
- be marked to show who supplied the plate
- be marked with a British Standard number (BS AU 145e for plates fitted after 1 September 2021)
The characters themselves must not be reflective or removable. GOV.UK also says your vehicle will fail its MOT if your number plates are incorrectly displayed.
Plates take a battering over the years. If yours look tired or you’re not sure they still meet the rules, our guide on how to check whether your current number plate still meets legal standards walks you through it. For the wider list of plate problems testers look for, see why number plates fail an MOT.
If the plate needs replacing, choose road-legal plates made to the current standard rather than a show plate.
A two-minute check before your MOT
You can do most of this on your drive:
- Switch on your position lamps (sidelights) with the engine off and walk to the back of the car.
- Check the plate is lit. If your car has two lamps, make sure both are working, not just one.
- Look at the lamp from behind the car. Its light should fall on the plate, not shine straight at you.
- Give the lamp housing a gentle push. It should be secure, not loose or hanging.
- Look at the plate itself. Check it’s readable, has the supplier mark and a British Standard number (BS AU 145e if fitted after 1 September 2021), and has nothing stuck over it.
If a bulb has gone, replace it with the type listed in your handbook and check again with the position lamps on.
Frequently asked questions
Will a blown number plate bulb fail my MOT?
It can. If the plate has only one lamp and it’s out, or all the lamps are out, the MOT manual lists it as a Major defect, and a vehicle with any major defect fails its MOT. If the plate has two or more lamps and only one is out, it’s a Minor defect. A vehicle with only minor defects passes, though minor problems can be listed on the result.
Do I need to fix one dead bulb if the other still works?
The manual treats that as a Minor defect rather than a Major one. Fixing it before the test is still sensible, because if the second bulb fails, you’re into the Major category.
Can number plate lights be LED?
The MOT manual defines a light source as “any bulb, LED or other means of emitting light”. Whatever you use, the tester checks the same things: it must light the plate, come on with the position lamps, be securely attached and not throw direct white light to the rear.
Do motorbikes need a number plate light?
The motorcycle MOT manual says the rear registration plate must be lit. Most bikes do this with the rear position lamp, but some have a separate plate lamp.
Is a loose number plate lamp an MOT issue?
Yes. A lamp that isn’t securely attached is listed as Minor, and one that’s likely to become detached is listed as Major.
Sources: GOV.UK: MOT inspection manual for cars, section 4 (https://www.gov.uk/guidance/mot-inspection-manual-for-private-passenger-and-light-commercial-vehicles/4-lamps-reflectors-and-electrical-equipment) and introduction (https://www.gov.uk/guidance/mot-inspection-manual-for-private-passenger-and-light-commercial-vehicles/introduction) · GOV.UK: MOT inspection manual for motorcycles, section 4 (https://www.gov.uk/guidance/mot-inspection-manual-for-motorcycles/4-lamps-reflectors-and-electrical-equipment) · GOV.UK: Getting an MOT: test result (https://www.gov.uk/getting-an-mot/after-the-test) · GOV.UK: Displaying number plates (https://www.gov.uk/displaying-number-plates/rules-number-plates)